Custom Built Motorcycles : Chopper Custom Harley Buell Chopper Bobber Rigid Hardtail
WELL AS 9 PHOTOS AND VIDEO
IF YOU NEED MORE INFORMATION JUST
EMAIL OR CALL STEVE @ (734)546-1913. IF YOU MAKE A REALISTIC OFFER I WILL
ADD A BUY IT NOW ACCORDINGLY.
Buell chopper powered by a 2000 Buell M2 Cyclone 1203cc engine. This
bike was used as a show bike and has less than 500 miles on it since the conversion from sport bike to chopper.
The frame is powdercoated matte black and the tins are professionally
painted with matte black paint from PPG.
The exhaust is now wrapped with a black wrap. The engine is a 45 degree OHV V2 Evolution motor, and makes 93 hp @ 6100
rpm and 89.2 ft/lbs torque @ 4900 rpm at the rear wheel. The engine is carbureted with a 40mm Keihin CV
The motor is matched with a 5-speed constant
mesh transmission with a wet multiplate clutch. Power is
transferred through a Triplex chain primary drive and 530 chain final drive.
Forks are 43mm Showa forks with adjustable rebound damping and
preload. Front brake is single disc 340mm Nissin with stainless steel
floating rotor and six piston caliper. The front wheel is a black 3-spoke cast
aluminum alloy 17” x 3.5″. Front tire has good tread and is a 120/70-ZR-17. Rear brake is single disc 230mm Nissin with stainless
steel rotor. The rear wheel is a black 3-spoke cast aluminum alloy 17” x 5.0”.
Rear tire also has good tread and is a 170/60 ZR17.
The bike has a great charging system with a 297 watt AC
alternator, and solid state regulator / rectifier. The battery
is a 12-volt 19 amp-hour SLA sealed. The chopper starts up quickly with an electric starter. It has a 4 ½” black and
The bike is very fast; a stock Buell Cyclone tops out at 135 mph and
runs 11.9sec in the ¼ mile. It is also fuel efficient, with an estimated
45 city / 53 highway MPG.
Black DTP Muscle drag bars, black grips
New stretched gas tank with chrome pop up gas cap
New Black leather custom solo seat
Black custom side fill round oil tank
New Chrome Softail forward controls
Custom rigid chopper frame powdercoated matte black
Custom DTP 1 ¾” exhaust
(73.41 cubic inches)
45 degree OHV
93.00 HP (69.35 kW)) @ 6100 RPM
(89.2 ft.lbs) @ 4900 RPM
88.8 x 96.8
mm (3.5 x 3.81 inches)
OHV, two valves per
cylinder, hydraulic adjusters, Self Adjusting Valve Adjustment
Screw-on disposable element
5-speed, constant mesh
(1) 2.69, (2) 1.85, (3) 1.43, (4) 1.18, (5)
Triplex chain, ratio 1.6:1
Front: 43mm Showa® forks with adjustable rebound damping and
Single disc Nissin; 340 mm (13.4 inches) stainless steel floating rotor ; six piston caliper;
Single disc Nissin; 230 mm (9.1 inches) stainless steel rotor;
single piston caliper
cast aluminum alloy, 3.5” x 17”
cast aluminum alloy 5.0” x 17”
watt AC alternator; solid state regulator/rectifier
12-volt, 19 amp-hour, SLA
(sealed lead acid)
BUELL M2 PERFORMANCE
¼ mile eta:
45 city / 53 highway
WILL SHIP ANYWHERE WITHIN THE CONTINENTAL UNITED STATES. I CAN HELP
ARRANGE RELIABLE, INEXPENSIVE SHIPPING WITHIN THE CONTINENTAL UNITED STATES,
BUT IT IS THE RESPONSIBILITY OF THE BUYER TO PAY ALL SHIPPING COSTS.
CALL OR EMAIL WITH A ZIP CODE, AND I WILL GIVE YOU AN ESTIMATE.
I WILL ALSO SHIP INTERNATIONALLY, EMAIL FOR AN ESTIMATE.
THE BUYER WILL GET A CLEAN AND CLEAR TITLE FOR
THE BUELL THAT THE MOTOR CAME FROM, A BILL OF SALE, AND AN MSO FOR THE
FRAME. THE BUYER IS RESPONSIBLE FOR TITLE TRANSFER, REGISTRATION,
ETC. IN THEIR HOME
THE BIKE IS BEING SOLD IN AS-IS CONDITION WITH NO
WARRANTIES EXPRESSED OR IMPLIED.
THE BIKE IS FOR SALE
LOCALLY, SO I RESERVE THE RIGHT TO END THE AUCTION EARLY AT ANY TIME.
EXTREMELY LOW RESERVE.
WINNING BIDDER PAYS A $500.00 NON-REFUNDABLE DEPOSIT
WITHIN 24 HOURS VIA PAYPAL. FULL AMOUNT IS REQUIRED WITHIN 7 DAYS UNLESS
OTHERWISE AGREED UPON. EMAIL WITH SPECIFIC QUESTIONS.
Cheap motorcycle for sale in Largo, FL (listed on eBay Motors). The bidding is right now at $4100.00.